The Float Switch is used to control a pump when filling or emptying a water tank/cistern. The switch position is adjustable along the float cord.

NF5 float switch with 10m cable. Max temperature 60'c, for drainage and emptying use.

NF5 float switch with 30m cable. Max temperature 60'c, for drainage and emptying use.

Stuart Turner Float Switch with 5m cable.

Lowara Key W Floatswitch - 10 Meters

Lowara Key W Floatswitch Plus 20 Metres Of Cable

Only suits Ponstar PBX-55011, PBX-55022, PBX7-55011 & PBX7-55022 models

Automatic pressure controlled. Pressure switch / flow sensor designed to automatically start and stop the pump, also with dry run protection

The Trebles Guardian High-Level Alarm System is a robust and reliable alert device for liquid level monitoring in water tanks, pump stations, and similar applications. This professional-grade alert device offers unparalleled reliability and robustness, ensuring operational safety and efficiency in critical environments.

The Tsurumi 100mm Sensor Probe Extension Set, part number 10-40-1004, is a specialised accessory designed to enhance the functionality and versatility of Tsurumi submersible pumps.

Maximum volatge: 230v. Alco PS1-A3R is a low cost versatile pressure switch utilised for many common pressure sensing applications. 0 - 7 bar.

Complete with 6m cable. The Flygt ENM-10 level regulators are the ideal choice for most level control applications, such as wastewater pumping stations and ground water or drainage pumping. When the liquid level reaches the regulator, the bulb tilts, activating the internal micro switch, which starts or stops a pump or triggers an alarm device.

Complete with 13m cable. The Flygt ENM-10 level regulators are the ideal choice for most level control applications, such as wastewater pumping stations and ground water or drainage pumping. When the liquid level reaches the regulator, the bulb tilts, activating the internal micro switch, which starts or stops a pump or triggers an alarm device.

Complete with 20m cable. The Flygt ENM-10 level regulators are the ideal choice for most level control applications, such as wastewater pumping stations and ground water or drainage pumping. When the liquid level reaches the regulator, the bulb tilts, activating the internal micro switch, which starts or stops a pump or triggers an alarm device.

Replacement reed switch suitable for all Monsoon Standard and Monsoon Universal pumps manufactured after 2008.

Manufacturers code: 41011. The Stuart Turner 1.5 Bar control module is designed to automatically start and stop the pump on demand, and protect it should the water supply fail. Complete with built in non return valve the units logic control senses either a pressure drop, or minimum flow of 1 lpm to automatically start the pump when ever the pressure is released. Should the supply become restricted or run-out then the control module will sense this and stop the pump to avoid damage. Each mode of operation is indicated on the control panel.