-
-
SK411-0003
Jabsco SK411-0003 Service KitJabsco SK411-0003 Service Kit
Contains:
- Impeller
- Seal
- O-Ring
- End Cover Screws
-
SK408-0011
Jabsco SK408-0011 Service Kit - Impeller - Seal - Gasket - End Cover ScrewsJabsco SK408-0011 Service Kit - Impeller - Seal - Gasket - End Cover Screws
-
SK406-0001
Jabsco SK406-0001 Service Kit - Impeller - Seal - Gasket - End Cover - ScrewsJabsco SK406-0001 Service Kit - Impeller - Seal - Gasket - End Cover - Screws
-
SK254
Jabsco SK254 Service Kit - Impeller - Seal - Gasket - End Cover - ScrewsJabsco SK254 Service Kit - Impeller - Seal - Gasket - End Cover - Screws
-
SK230
Jabsco SK230 Service Kit - Impeller - Seal - Gasket - End Covers - ScrewsJabsco SK230 Service Kit - Impeller - Seal - Gasket - End Covers - Screws
-
-
JAB-28531-0103B
Jabsco Seal Assy - 28531-0103BManufacturers code: 28531-0103B. Image for illustration purposes only.
-
-
-
TX120STT
Tapflo TX120STT 1" Stainless Steel/PTFE Explosion Proof ATEX AOD PumpThe ATEX directive 94/9/EC (also known as ATEC 100a) is applicable on products used in explosion hazardous zones.
-
GMT-PH2D-HC
Trebles PH2D High Capacity Digital 2Pump Floor Mounted Pressurisation UnitThe PH2D pressurisation unit is a simple, robust and reliable mechanical pressurisation unit that has been designed with over 50 years of experience is seal system equipment.
-
SGR-985742
Grundfos 985742 JP5 Shaft Seal & Gasket Kit Model CGrundfos JP5 Shaft Seal & Gasket Kit Model C 985742
-
13715553
Gusher 13715553 2.2 kW02P90L Pump Motor - 400v - Three PhaseGusher 13715553 2.2 kW02P90L Pump Motor - 400v - Three Phase
-
303 1258 910
Smedegaard Omega 3-125-4T In Line Glanded Circulator Pump - 260mm - FlangedThe Omega 3-125-4T from Smedegaard is an in-line glanded circulator pump with the motors mounted onto the pump body directly. The stainless steel AISI 316 short shaft extension of the Omega 3-125-4T makes the unit very compact ensuring stable running and long reliable service.
-
AU63-1/2-3
Sacemi AU63-1/2-3 Gamar Tank Mounted Pump - 13 Ltr/minSacemi Gamar are suitable for the transfer of clean liquids, containing impurities not exceeding 0.03 mm. The hydraulic components: brass impeller, cast iron bottom and aluminum pump body, allow it to be used with emulsions, oily substances and liquids in general as long as they are not oxidizing for the construction materials. The viscosity must not exceed 21 cSt (3 ° Engel).
Not sure what you're looking for?
Rated excellent on
We're the largest independent pump distributor in the UK
Call us to get expert advice:
