1 Bar Shower Pumps

Previously known as RHP50. Designed specifically for whole house systems, or just the bathroom, these twin-ended pumps are uniquely equipped to handle single or multi outlet use, ie: the hot or cold taps being used individually or both at the same time. Supplied with isolating valve and 15mm AV couplers (not 22mm as per the literature provided).

Manufacturer code: 46407 has now been replaced with the Stuart Turner 47343.

Manufacturer code: 47342. Showermate eco pumps are designed for domestic applications and will only function under positive head conditions. These pumps are suitable for installation into open vented hot and cold water systems. Standard pumps require a flow of just 0.8 l/min to start.

Manufacturers Code: 46532. Showermate Universal pumps are designed for domestic use only and will function under both positive and negative head conditions and are suitable for installation into open vented hot and cold water systems. The Showermate Universal U1.8 Bar Twin pump can be used for positive and negative head applications.

Monsoon Standard twin pumps are designed for installation into vented systems to pump both hot and cold water supplies - boosting both equally.  The S1.5 Bar Twin pump is suitable for positive head applications only.

'Extra Quiet' Shower Pump. Grundfos Watermill Amazon Twin Impeller Heavy Duty Positive Head regenerative Shower Pumps are designed and manufactured to the highest standards to give high performance and durability.

'Extra Quiet' Shower Pump. Grundfos Watermill Amazon Universal Twin Impeller Heavy Duty Negative Head regenerative Shower Pumps are designed and manufactured to the highest standards to give high performance and durability.

The Salamander range of CT Shower Pumps are tough, easy to fit general purpose twin booster pumps, this range will boost the hot and cold water supplies to thermostatic or manual shower mixer valves. 

The Salamander range of CT Xtra Shower Pumps are tough, easy to fit general purpose single outlet pumps designed to boost supplies to the bathroom and the rest of the house. These pumps will increase flow to any tank-fed appliance.

The CT Force range can be Installed in a variety of applications, delivering CT FORCE power to your shower or performance to all outlets in your home.

The CT Force range can be Installed in a variety of applications, delivering CT FORCE power to your shower or performance to all outlets in your home. As with all shower pumps, Salamander Pumps must only be installed on ‘Gravity’ systems, i.e. systems with a cold water cistern (usually sited in a loft) and a hot water cylinder (usually in an airing cupboard) feeding the hot and cold inlets of the pump.

Replaces the ESP50CPV. Designed specifically for bathroom systems where there is a need to boost baths, basins or showers which may be above and/or below the cold water storage tank(s). Supplied with isolating valve and 22mm AV couplers.

Previously known as the ESP55CPV. This single pump boosts supplies to a variety of appliances from tank-fed systems, and are suitable for both positive and negative head systems. Selection should be based on pressure requirements. Supplied with isolating valve and 22mm AV couplers.

The Jabsco Waterpuppy pump is a great general purpose pump that can be used as a bilge pump or shower drain pump.

Manufacturers part number: 23680-4003

The STR2 & SSR2 range of shower booster pumps has been specifically designed to minimise turbulence within the pump head, giving class leading efficiency and low noise levels.

Manufacturers Code: 46532. Showermate Universal pumps are designed for domestic use only and will function under both positive and negative head conditions and are suitable for installation into open vented hot and cold water systems. The Showermate Universal U1.8 Bar Twin pump can be used for positive and negative head applications.