Salamander

Previously known as RHP50. Designed specifically for whole house systems, or just the bathroom, these twin-ended pumps are uniquely equipped to handle single or multi outlet use, ie: the hot or cold taps being used individually or both at the same time. Supplied with isolating valve and 15mm AV couplers (not 22mm as per the literature provided).

The Salamander HomeBoost pump is designed to boost low mains water pressure into a domestic house to improve low water flow from the mains supply at peak demand times.

The Salamander TapBoost is an intelligent domestic inline clean water pump intended to improve the flow to a single outlet/point of use (such as a tap, shower, toilet cistern) which suffers with a poor natural flow. It is suitable for use with mains water and tank fed water systems, with water up to 65°C.

All Salamander pumps are supplied with anti-vibration (AV) couplers in order to limit the transfer of pump vibration to the associated pipework. The beneficial effect of anti-vibration (AV) couplers is lost if they are bent or twisted on installation.

All Salamander pumps are supplied with anti-vibration (AV) couplers in order to limit the transfer of pump vibration to the associated pipework. The beneficial effect of anti-vibration (AV) couplers is lost if they are bent or twisted on installation.

Salamander Expansion Vessel. Manufacturers code: ACCPV1L. The Salamander pressure vessel (ACCPV1L) is a genuine, brand new Salamander product, covered by a Salamander manufacturer's guarantee.

Salamander EVE is an intelligent, compact twin ended full house pump. Combining all the Technology inside to fulfil your water performance needs.

This twin impeller bathroom pump will efficiently boost the hot and cold water supplies to showers, bath basins and toilets in a negative head gravity fed installation. 

Previously known as the Salamander RSP75. Boosts supplies to washbasins, baths and showers, whether the requirement is for multi-function, conventional or Victorian style showerheads. The centrifugal impeller gives them quiet running with sustained pressure and flow relative to other shower pump types.

The CT Force range can be Installed in a variety of applications, delivering CT FORCE power to your shower or performance to all outlets in your home.

The CT Force range can be Installed in a variety of applications, delivering CT FORCE power to your shower or performance to all outlets in your home.

The CT Force range can be Installed in a variety of applications, delivering CT FORCE power to your shower or performance to all outlets in your home.

The CT Force range can be Installed in a variety of applications, delivering CT FORCE power to your shower or performance to all outlets in your home.

Previously known as the ESP55CPV. This single pump boosts supplies to a variety of appliances from tank-fed systems, and are suitable for both positive and negative head systems. Selection should be based on pressure requirements. Supplied with isolating valve and 22mm AV couplers.

Previously know as ESP75CPV. Designed specifically for one or two bathroom systems where there is a need to boost baths, basins or showers which may be above and/or below the cold water storage tank(s).