Salamander Pumps

Previously known as RHP50. Designed specifically for whole house systems, or just the bathroom, these twin-ended pumps are uniquely equipped to handle single or multi outlet use, ie: the hot or cold taps being used individually or both at the same time. Supplied with isolating valve and 15mm AV couplers (not 22mm as per the literature provided).

The Salamander TapBoost is an intelligent domestic inline clean water pump intended to improve the flow to a single outlet/point of use (such as a tap, shower, toilet cistern) which suffers with a poor natural flow. It is suitable for use with mains water and tank fed water systems, with water up to 65°C.

Previously known as the ESP55CPV. This single pump boosts supplies to a variety of appliances from tank-fed systems, and are suitable for both positive and negative head systems. Selection should be based on pressure requirements. Supplied with isolating valve and 22mm AV couplers.

This twin impeller bathroom pump will efficiently boost the hot and cold water supplies to showers, bath basins and toilets in a negative head gravity fed installation. 

The CT85/85+ Xtra pump is a 2.2 bar pressure, single, positive pump.

The fittings kit supplied here will not only make installation easier but it’ll also make it more efficient too. It will ensure servicing is a doddle if required in the future and it’ll offer total flexibility if you’re unsure on the size of your pipework at the time of purchase.

Previously know as the ESP80CPV. The RP80SU boosts supplies to a variety of appliances from tank-fed systems, and is suitable for both positive and negative head systems. Selection should be based on pressure requirements. Supplied with isolating valve and 22mm AV couplers.

Previously know as ESP75CPV. Designed specifically for one or two bathroom systems where there is a need to boost baths, basins or showers which may be above and/or below the cold water storage tank(s).

Replaces the ESP50CPV. Designed specifically for bathroom systems where there is a need to boost baths, basins or showers which may be above and/or below the cold water storage tank(s). Supplied with isolating valve and 22mm AV couplers.

This product was formerly known as ESP120 CPV. The RP120SU pump is a 3.6 bar single centrifugal shower pump suitable for boosting hot or cold water performance in a gravity fed, negative or positive head system. This pump can be used with a variety of applications, including single wash basin, bath and kitchen taps. It is suitable for hot water to showers or mixers when the cold is from the mains water as well.

Previously known as the Salamander RSP75. Boosts supplies to washbasins, baths and showers, whether the requirement is for multi-function, conventional or Victorian style showerheads. The centrifugal impeller gives them quiet running with sustained pressure and flow relative to other shower pump types.

The Salamander range of CT Shower Pumps are tough, easy to fit general purpose twin booster pumps, this range will boost the hot and cold water supplies to thermostatic or manual shower mixer valves. 

The Salamander range of CT Xtra Shower Pumps are tough, easy to fit general purpose single outlet pumps designed to boost supplies to the bathroom and the rest of the house. These pumps will increase flow to any tank-fed appliance.

The Salamander range of CT Shower Pumps are tough, easy to fit general purpose twin booster pumps, this range will boost the hot and cold water supplies to thermostatic or manual shower mixer valves.