-
WRS-012-400
JS RSD400 Puddle/Residue Pump - 230vJS RSD400 1Ph 230v Hz pump - RSD400 Residue pump also known as a puddle sucker has the ability to pump water down to approx 1mm while the remaining flood water can be swept into the pump for removal. Stainless steel outer case, shaft and motor case. Cast iron motor lid, pump casing and volute. Equipped with non return valve on the suction of the pump to help stop any return of water.
-
WRS-012-402
JS RSD400 Puddle/Residue Pump - 110vThe RSD-400 Puddle Pump, also known as a "Puddle Sucker" or "Residue Pump", is a low-level drainage pump with the ability to drain down to 1mm.
-
WRS-011-750A 2
JS-750 Heavy Duty Sump Pump - Automatic - 230v - 2 inchThe JS-250, JS-400, JS-750 and JS-1500 range of single phase submersible pumps are ideal for clean & dirty water drainage applications. They feature twin mechanical seals, a stainless steel motor shaft and case and a cast iron impeller. They are supplied with 10m of power cable and are available in manual or automatic versions
-
WRS-011-750A 3
JS-750 Heavy Duty Sump Pump - Automatic - 230v - 3 inchCapable of handling 46mm solids. The JS-SV series are a range of single phase submersible sewage pumps which feature a vortex impeller, allowing soft solids to pass through the pump body to waste.
-
WRS-011-752A 3
JS-750 Heavy Duty Submersible Pump - Automatic - 110v - 3 inchThe JS drainer range are all-around dewatering pumps that offers top performance and long service life.
Ideal for clean or grey water drainage, ranging from 1½"-3" hose diameter.
-
WRS-020-702A
JS - GS1200A Sewage Grinder Pump - Automatic - 230vDomestic/industrial Submersible sewage grinder pump. 230V AUTO 1 1/4" - 19M HEAD MX. - 180LPM MAX. FLOW
-
WRS-011-760
JS 1500 Manual Submersible Pump - 3 inch - 230vThe JS-SV series are a range of single phase submersible sewage pumps which feature a vortex impeller, allowing soft solids to pass through the pump body to waste.
-
WRS-020-720
JS GST-22 Heavy Duty Sewage Grinder Pump - Manual - 415V - 2 InchJS Pump model GST-22 2" 415V 3 phase Manual Heavy Duty Sewage Grinder Pump.
-
011-702
JS-650 SV Vortex Sewage Pump - Manual - 2 inch - 110v110V Single phase sewage pump. The JS-SV series are a range of single phase submersible sewage pumps which feature a vortex impeller, allowing soft solids to pass through the pump body to waste.
-
WRS-011-752 2
JS-750 Heavy Duty Submersible Pump - Manual - 110v - 2 InchHigh performance all-around dewatering pumps.
-
WRS-011-764A
JS 1500 H Submersible Pump - Automatic - 2inch - 230vThe JS-250, JS-400, JS-750 and JS-1500 range of single phase submersible pumps are ideal for clean & dirty water drainage applications.
-
WRS-012-150
JS RSD 150 Puddle Buddy - 230v - ManualNew generation residue pump. The Puddle Buddy puddle pump in 230v only and designed for clean water applications where nuisance standing water is present such as cellars, basements, garages, flat roofs, car parks etc.
-
WRS-011-400A
JS-400A Submersible Pump - Automatic - 2 inch - 240vJS400 Heavy duty drainage pumps designed for continuous applications, site drainage, clean and dirty water.
-
WRS-011-402
JS-400 Heavy Duty Submersible Pump - Manual - 2inch - 110VThe JS-SV series are a range of single phase submersible sewage pumps which feature a vortex impeller, allowing soft solids to pass through the pump body to waste.
-
012-698
JS JST-4SV 2" Submersible Vortex Sewage Pump - 400v - Three Phase - ManualST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller, lower motor bearing/seal housing and motor top cover, while the shaft and motor casing are manufactured from stainless steel.
-
011-768A
JS 1500 SV Submersible Waste Water/Sewage Vortex Pump - 230vComplete with float switch. Thermal overload protection guards against high amperage and high temperature.
Not sure what you're looking for?
Call us to get expert advice:
JS
JS Pumps are a brand of submersible pumps designed for a variety of applications, including drainage, dewatering, and sewage handling.
Some key features of JS Pumps include:
- Submersible design for low to high-flow and pressure applications
- Available in a range of materials like AISI 304 stainless steel and cast iron
- Capable of handling liquids up to 40°C and solids up to 65mm in size
- Offered in single and three-phase options, with some models available in 110V, 230V, or 400V
- Suitable for applications like effluent wastewater, sump emptying, and light industrial uses
- Different impeller types available depending on the model, such as grinder, vortex, and cutter
- Designed for continuous duty applications and site drainage of clean and dirty water
The JS Pump brand is certified to ISO 9001 and offers a wide range of submersible pump models suited for industrial, agricultural, domestic, mining, aggregate, and steel industry applications. Popular JS Pump categories include the SV soft solids handling vortex, RS submersible, JST 415V submersible, and GS heavy-duty sewage grinder pumps.