DAB ESYTANK 500 MINI Fitted with ESYDOCK MINI + ESYBOX MINI

ESYTANK Mini is a drinking water storage tank, designed with integration of the ESYBOX Mini booster pump system. Complete tank and pump system to boost mains water supply in domestic/ residential and light commercial applications.

Esybox Mini 3 has a different appearance than any other booster set and is small and completely integrated. Once you install and use it, you realize that the real difference is in the comfort and performance.

Esybox Mini 3 uses the most advanced DAB technologies to create constant pressure according to the system demands and thus an optimization of energy consumption.

Suitable for use with potable water, in domestic systems and gardening applications.
The new 3-rotor model ensures further noise reduction and energy consumption.
Managing the water pressure in your home has never been so simple and quiet.

It is possible to create groups of maximum two pumps. It supports the remote control function thanks to the DConnect service integrated directly into the system. 

EsyBox Mini 3 is ACS certified.

OPERATING RANGE: flow rate up to 80l/min; head up to 55m

PUMPED LIQUID: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized and not chemically neutral

LIQUID TEMPERATURE RANGE: from 0°C to + 35°C for domestic use and from 0°C + 40°C for other use

MAXIMUM SUCTION DEPTH: 8 meters

EsyTank/EsyTank 500 Mini is a tank with a 480l capacity, suitable for use with drinking water. It features a valve for filling from the mains with an unrestricted air gap float for backflow prevention, in line with standard UNI EN 1717. The CAT3 version features an AG-type air gap overflow system with DN50 outlet, while the CAT5 has an AB-type air gap system with auxiliary DN50 outlet.
The AG- or AB-type overflow systems on both versions are located at the back; the tank comes with an insect guard that can be attached with special screws.
EsyTank/EsyTank 500 Mini comes with EsyDock, suction pipe with foot valve and delivery line. The tank is suitable for fixed mounting above ground: the four slots in the base make it easy to secure to the ground. A plug or a drain line can be connected to the front wall by using the threaded bulkhead adapter that comes with the tank.

TECHNICAL DATA

• Pumped fluid: clean, free from solids or abrasive substances, not viscous, not aggressive, not crystallised and chemically neutral.
• Maximum liquid temperature: 40°C
• Maximum environment temperature: 50°C
• Maximum capacity: 480 litres
• Supply pressure allowed at mains water inlet: max. 6 bar
• Dimensions of mains water inlet pipe: ¾”
• Dimensions of delivery pipe: 1”
• Dimensions of overflow pipe connection: DN 50
• Dimensions of front discharge (not drilled): DN40